How to use Clonezilla on wireless network

(adsbygoogle = window.adsbygoogle || []).push({});

Start Clonezilla normally but after “Collecting the info of network devices” and “Getting the link status of…” lines you have to choose your wireless netword card probably wlan0 and now on “Choose the mode to setup the network for this network card: wlan0” you choose

"enter_shell Enter_command_line_prompt,_Do_it_manually"

[…]

Raspberry Pi: How to get Bluetooth keyboard work

I have Prodige NanoX small bluetooth keyboard and touchpad which I wanted to use with my Raspberry Pi so here is how I get it to work:

After we have plugged in our bluetooth receiver we should see it with lsusb:

Bus 001 Device 004: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dong0le (HCI mode) […]

Netdiscover finding IP-address when there is no DHCP server

Sometimes you have to get IP-address from the network and when there is DHCP server it’s pretty easy but sometimes when all devices have static IP-address and there is no DHCP server you might have a little problem to find out which IP-range they are using on this network.

There is one really nice and […]

WarSpying: Wireless Camera Hunter

Specifications:

Full Range Frequency Scanning from 900 MHz – 2.7 GHz 2.5″ Hight Resolution Monitor LCD Display Shows Frequency and User Setting Details Full Range Video Protocol auto-switching for PAL/NTSC, CCIR/EIA Auto and Manual Scanning Modes Audible/Vibrating alarm

I’m not going to attach “screenshots” or sample video what I have found because that is […]

Warwalking: Nokia N900

I was bored at work so I was looking through downloadable application list of my Nokia N900 and find out that there is finally Kismet for N900 and I was really happy. This far there has been airodump-ng and aircrack-ng so it has been possible to crack WEP just with N900 but now with Kismet […]