Configuring HP ProCurve Switch

ProCurve Networking by HP

Reset switch to factory defaults

If I’m not using brand new switch, I normally like to reset it back to factory defaults before doing anything. Use a pointy object (like paper clip) and press “Reset” and “Clear” buttons on the front of the switch at the same time. Release “Reset” […]

HP ProCurve CLI CheatSheet

LOG log Display log events (most recent last) log -r Display log events (most recent first) log A12 Display log events of port a12 log A12 -r Display log events of port a12 (most recent first) log 192.168.0.1 Display log events of 192.168.0.1 MAC show mac A5 Show MAC-address of the device on port […]