How to use Clonezilla on wireless network

(adsbygoogle = window.adsbygoogle || []).push({});

Start Clonezilla normally but after “Collecting the info of network devices” and “Getting the link status of…” lines you have to choose your wireless netword card probably wlan0 and now on “Choose the mode to setup the network for this network card: wlan0” you choose

"enter_shell Enter_command_line_prompt,_Do_it_manually"


Raspberry Pi: Wireless Network

How to get wifi work on your Raspberry Pi Raspbian Wheezy Linux distribution.

You have to edit your interfaces file:


This kind of interfaces file works for me:

auto lo iface lo inet loopback iface eth0 inet dhcp allow-hotplug wlan0 auto wlan0 iface wlan0 inet dhcp wpa-ssid "Change your network name here" wpa-psk "Change […]

Netdiscover finding IP-address when there is no DHCP server

Sometimes you have to get IP-address from the network and when there is DHCP server it’s pretty easy but sometimes when all devices have static IP-address and there is no DHCP server you might have a little problem to find out which IP-range they are using on this network.

There is one really nice and […]

Basics of NMAP basics

NMAP is probably best port scanner and network exploration/security auditing tool what you can find for free. So here is some really basic things how to use it.

There is many ways to scan with nmap:

Using wildcard mask: nmap 192.168.0.* Scan’s –

With range: nmap Scan’s –

Using notation: […]